基于连续帧间差分的抛弃式探头三维下沉运动处理方法研究

抛弃式探头由无人机装载,能够在较远目标区域和危险海域开展海洋水文环境剖面参数的测量。通过安装不同传感器,可以实现对温度、盐度的剖面测量,其深度的测量采用数学方法计算得到。针对双摄像机水箱实验获得的5个不同攻角实验结果,分析了常用的运动目标的检测方法,最终选择基于连续帧间差分法,确定探头的三维坐标位置,进而得到探头下沉运动的三维运动轨迹和速度曲线等信息。探头从水面释放后攻角在下沉过程中不断调整,改变运动姿态,同时伴随自身的旋转,抵消水平方向阻力作用,初始攻角产生的深度测量误差主要体现在加速过程,探头达到匀速运动后测量误差不变,在不考虑横流的情况下,探头最后以匀速垂直下落运动。     

基于PSR-WSVM模型的边坡位移预测

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

载波/多普勒平滑伪距在Android手机中的定位实现

针对Android手机GNSS伪距定位精度较低的问题，利用手机端观测信息，通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量，从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法，然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型，并设计合理有效的试验对算法的精度进行评定。试验结果表明：在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度，且多普勒平滑算法表现更优；在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度，但是载波相位平滑算法较原始伪距更差；由于硬件的制约手机端周跳和信号失锁严重，占比超过50%，载波相位在手机端的可用性较低；多普勒平滑算法的最优平滑时间常数小于等于10 s，具有实时动态定位的巨大潜力。     

地震前后垂直形变场动态演化的量化指标

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。     

有限元法与伪谱法混合求解弹性波动方程

在地震波场数值模拟中,有限差分法、有限元法和伪谱法都是常用的基本方法,但它们各有不同的适应性和优缺点,如有限差分法、有限元法都存在减弱网格频散和提高计算效率的矛盾,而伪谱法的网格频散小且计算效率高.有限差分法和伪谱法在处理地表结构复杂或地表剧烈起伏以及地下结构复杂的情况时存在较大的难度,而有限元法可较为理想地拟合起伏地表和任意弯曲界面,且可方便地处理自由边界条件和界面边界条件.尝试将有限元法和伪谱法相结合,形成地震波场数值模拟的一种混合方法,利用二者的优点,克服二者的缺点,达到既减弱网格频散又提高计算精度和效率的目的.并采用所谓的‘过度区域‘技术解决两种不同算法的衔接问题.模拟实例表明,给出的混合模拟方法不失为弹性波场数值模拟的一种有效方法.     

Metamorphism in Archaean greenstone belts: calculated fluid compositions and implications for gold mineralization

An inescapable consequence of the metamorphism of greenstone belt sequences is the release of a large volume of metamorphic fluid of low salinity with chemical characteristics controlled by the mineral assemblages involved in the devolatilization reactions. For mafic and ultramafic sequences, the composition of fluids released at upper greenschist to lower amphibolite facies conditions for the necessary relatively hot geotherm corresponds to those inferred for greenstone gold deposits (X_CO2= 0.2–0.3). This result follows from the calculation of mineral equilibria in the model system CaO–MgO–FeO–Al₂O₃–SiO₂–H₂O–CO₂, using a new, expanded, internally consistent dataset. Greenstone metamorphism cannot have involved much crustal over-thickening, because very shallow levels of greenstone belts are preserved. Such orogeny can be accounted for if compressive deformation of the crust is accompanied by thinning of the mantle lithosphere. In this case, the observed metamorphism, which was contemporaneous with deformation, is of the low-P high-T type. For this type of metamorphism, the metamorphic peak should have occurred earlier at deeper levels in the crust; i.e. the piezothermal array should be of the ‘deeper-earlier’type. However, at shallow crustal levels, the piezothermal array is likely to have been of ‘deeper-later’type, as a consequence of erosion. Thus, while the lower crust reached maximum temperatures, and partially melted to produce the observed granites, mid-crustal levels were releasing fluids prograde into shallow crustal levels that were already retrograde. We propose that these fluids are responsible for the gold mineralization. Thus, the contemporaneity of igneous activity and gold mineralization is a natural consequence of the thermal evolution, and does not mean that the mineralization has to be a consequence of igneous processes. Upward migration of metamorphic fluid, via appropriate structurally controlled pathways, will bring the fluid into contact with mineral assemblages that have equilibrated with a fluid with significantly lower X_CO2. These assemblages are therefore grossly out of equilibrium with the fluid. In the case of infiltrated metabasic rocks, intense carbonation and sulphidation is predicted. If, as seems reasonable, gold is mobilized by the fluid generated by devolatilization, then the combination of processes proposed, most of which are an inevitable consequence of the metamorphism, leads to the formation of greenstone gold deposits predominantly from metamorphic fluids.     

Structures in the phase space of a four dimensional symplectic map

We numerically investigate the projections of non periodic orbits in a 4-dimensional (4-D) symplectic map composed of two coupled 2-dimensional (2-D) maps. We describe in detail the structures that are produced in different planes of projection and we find how the morphology of the 4-D orbits is influenced by the features of the 2-D maps as the coupling parameter increases. We give an empirical law that describes this influence.     

差分观测与伪距观测的定位精度

严格论证了在对空间或地面目标的定位中,利用伪距测量观测模型的几何因子大于用台站间一次差分观测模型的几何因子.此外,台站间完全差分测量观测的定位精度优于不完全测量情形的定位精度.这些结果给人们在实际工作中采取何种定位方式提供了可靠的理论依据.     

激光天文动力学弱光锁相的研究

近年来激光物理与应用的进展促成了激光天文动力学空间任务概念的提出。在激光天文动力学任务概念研究方面 ,必须对由远程航天器上传回的激光进行讯号的测量与处理。激光经过长距离的传输后 ,功率大幅下降 ,因此在空间任务概念的考虑上 ,弱光锁相是计划中关键性的技术。由航天器射来的激光 ,经过望远镜聚光后与本地激光进行锁相 ,由本地激光承载及传达太空激光的相位信息。实验中 ,我们使用 2支半导体激光泵浦非平面环形共振腔钇镏石激光 (Diodelaserpumpednon -planarringcavityNd :YAGlaser) ,分别代表远程的弱光及代表本地的强光 ,建立弱光锁相环路系统 (weak -lightphase -lockedloopsystem)。以中性光强度滤光器 (ND -filter;neutraldensityfilter)减弱光讯号来仿真远程激光传来的弱光。在相位探测部分使用均衡探测法 ,消除激光强度噪声 ,以提高讯噪比。同时配合适当的环路滤波器 ,控制激光频率 ,提高锁相的能力。对 2nW的弱光与 2mW的强光可长时间锁相 ,其均方根相位误差为 57mrad。 2 0 0pW的弱光与 2 0 0 μW的强光锁相时间可达 2h以上 ,其相位误差为 2 0 0mrad。 2 0pW的弱光与 2 0 0 μW的强光锁相时间亦可达 2h以上 ,其相位误差为 1 60mrad。最后 ,我们对 2pW的弱光与 2 0 0 μW的强光锁相 ,